Availability: In Stock Model: ASTG18KMCB Model Info: WiFi Reverse Cycle Split System Size: 5.0KW Manufacturer:Fujitsu Standard Warranty: 5 Years
EXTENDED WARRANTY: Download the Extended Warranty Back Up Plan brochure here
Installation Available - Selected regions of Sydney only (see installation tab below):
Placement of Outdoor Unit:
Disconnect Existing Airconditioner:
* Cost is based on a back to back installation only, this includes 3 meters of pipe work and 15 meter electrical circuit back to mains. Additional pipe exceeding 3 meters costs $45 per meter and electrical cable exceeding 15 meters cost $5 per meter:
Estimate Shipping Cost Enter your postcode then select your Suburb
Dispatched in 1-2 business days.
Transit times : NSW : 1-3 Business days, QLD/VIC/SA 2-4 Business days, WA 6-10 Business days
The position of the louvres is set automatically to match the operating mode. It is also possible to adjust the louvres using the remote control.
AUTOMATIC AIR FLOW ADJUSTMENT
When auto mode is selected for the fan, the micro-processor adjusts the airflow to follow changes in room temperature.
The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.
Limits the maximum operation current, and performs operation with the power consumption suppressed.
ON-OFF timer can be set to operate once every 24 hours.
BLUE FIN HEAT EXCHANGER
Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchange.
DOUBLE SWING AUTOMATIC
Complex swing action of the louvres enables them to swing automatically in both horizontal and vertical directions.
Human sensor catches movements of people in a room.
AUTO SHUT LOUVRE
The auto shut louvres close or open automatically when the unit stops or starts.
Should there be temporary loss of power; the unit will automatically restart itself in the same operating mode, once the power is restored.
This timer allows selection of one of four options. ON, OFF, ON > OFF, or OFF > ON.
Indicates the filter cleaning period by lamp.
With All DC, electricity loss is decreased and power consumption reduced.
The unit automatically switches between heating and cooling modes based on the temperature setting and room temperature.
Different on-off times can be set for up to 7 days.
By installing the mobile app on a smart device, several functions can be controlled from outside the house.
Sydney Metro Map
Installation available in the following regions only: Penrith, Blacktown, Camden, Campeblltown, Fairfield, Liverpool, Holroyd, Parramatta, Auburn, Bankstown, Canterbury, Hurstville, Rockdale, Kogarah, Ashfield, Burwood, Strathfield, Ryde
Our installers will bring the unit on the day of installation so you could save on delivery.
WHAT IS A BACK TO BACK INSTALLATION ?
This is the most common way to install a split system air conditioner
This is where the indoor unit is mounted inside the home on an external wall and the outdoor unit is installed directly behind it on the ground.
Installation price applies to a Standard Back to Back Installation only. (See illustration below)
This includes 3 meters of refrigerant pipe run ( refer to A in illustration, additional piping required after 3 meters will be charged at $45 per meter)
Units up to 3.5kw : Power is taken from an existing circuit
Units 4.0kw and above : A new circuit is installed dedicated for the air conditioner only (up to 15 meters of electrical cabling included)
* Additional costs will be incurred for non standard installations, please contact us for a quote.
* All installations are carried out by our Qualified licensed technicians.